machine finish
英 [məˈʃiːn ˈfɪnɪʃ]
美 [məˈʃiːn ˈfɪnɪʃ]
机械精加工；机械抛光
双语例句
- Add the detailed information for the first remote machine, and then click Finish.
为第一个远程机器添加详细信息，然后点击Finish。 - HONER: Machine which uses honing tape to improve surface finish of cups, cones, and races.
珩磨机：用于对内圈、外圈和滚道进行珩磨来提高表面光洁度的设备。 - It's a tiny machine but hopes to get to the finish line successfully.
希望这个小小的机器人能成功抵达终点。 - Meets the thunderstorm, the sand dust and so on the heavy weather is, should windward machine finish the preparation in these aspects?
遇到雷雨、沙尘等恶劣天气是，应对风机在那些方面作好准备？ - The machine can finish the moulding and processing of heteromorphosis iron craftwork with good consistency, and can process parts in batches and high efficiency.
本机可以完成异形铁艺工件的一次加工成形，铁艺工件一致性好，可实现批量生产，工作效率高。 - Just press the button slightly and the machine will finish all process of lifting, closing, adding pressure, holding pressure, timing and descending.
自动控制，只需轻按一按钮，便可完成压板上升、闭合、加压、保压、计时、压板下降等整套程序。 - And the machine will finish all the washing cycles for you.
洗衣机就会完成所有洗衣程序。 - This machine's configuration compact, finish the complicated sealing form.
该机结构紧凑，可完成复杂的封尾形式。 - The packing machine can finish the process, bag forming, filling, counting, sealing, cutting and so on solid granuliform material.
此包装机能完成集制袋，充填，计数，封口，切断等过程。 - I have two suits to send to the cleaners. And the machine will finish all the washing cycles for you.
我有两套衣服要送到洗衣店去干洗。洗衣机就会完成所有洗衣程序。 - After giving it a thought, I'd like to travel in a time machine, go back to the past and finish off the things which I haven't been able to finish in the past.
想想还是觉得我更喜欢拥有时间机器可以在不同时空穿梭，回到过去。把以前未完成的事情做完。 - Multiple support vector machine can perform more complex tasks because every support vector machine only finish the subtask.
由于每个子网络只完成相应的子任务，因而多支撑向量网络可以解决更为复杂的学习任务。 - The Shrinking of Cotton Fabrics and Machine Shrunk Finish
纯棉织物缩水与机械预缩 - GT for machine tool bed machining and their guideways 'finish planing
床身成组加工和导轨精刨 - By analysis of the motion principles of the machine-tools, was shown that it is difficult to treat the equiangular spiral-groove using the machine finish and the ultra-sonic wave method otherwise there is a great errors.
通过对机床运动原理的分析，证明用机械加工和超声波加工这种螺线槽是有困难的，或有很大的误差。 - In order to increase the joint, forming speed and improve the joint quality in the roller compacted concrete ( RCC) dam, the special joint, forming machine is designed, which can finish both forming joint and filling stuff at the same time.
为提高碾压混凝土施工中的切缝速度和质量，研制和开发出能同时完成碾压混凝土快速连续造缝和隔离材料填充的专用造缝机。 - Based on the vector bender principle of the numerical pipe-bending machine, use PLC and position module to finish the design of bender's control system.
基于数控弯管机的矢量弯管原理，利用PLC和定位模块控制单元相结合的方法来实现弯管机控制系统的设计。 - Many parts of machine product all involve finish machining of holes.
对机械产品的多种零件均涉及孔的精加工。 - As for the technical problems of interrupt handling, and the I/ O port access conflicts in designing programmable device simulation systems, we apply the scheme of virtual machine to PDSS and finish the design of a PDSS virtual machine.
本文针对可编程器件仿真系统设计中有关中断处理、I/O端口访问冲突等技术难题，将虚拟机的思想应用于PDSS，完成了PDSS虚拟机的设计。 - The development of the machine can finish the surface machining of large spec, tabular, high precise quenching steel and high rigidity alloy steel of special, to ensure the high machining precision of the workpiece.
该机床研制可解决国内加工中大规格、扁平类、高精度淬火钢和特殊高硬度合金钢的表面加工，并使工件具有极高的加工精度。 - Research results suggest designed machine can automatically finish grafting process, but working precision would be improved in future.
研究结果表明，所研制的嫁接机能自动完成茄子的嫁接过程，但作业精度仍有待提高。 - Different matrix with steel, aluminum alloy and bakelite as well as aluminum-resin have different effect on the tool life, grinding machine efficiency and finish quality of abrasive products.
磨具的钢基体、铝合金、胶木以及新兴的铝酚醛等不同材质的基体对磨具的寿命、加工效率和加工质量有着不同的影响规律； - Application of programmable logic controller in the machine tool control of finish boring of bisected sliding bearing
剖分式滑动轴承专用镗床的PLC控制应用 - Through control of PLC this machine is able to finish such sequential process as feeding, loading ball and blanking. The whole system takes advantage of automatic operation and self diagnosis of fault.
利用PLC控制整机进行上料、装球、出料等顺序工作，整个系统可以实现自动运行和故障自诊断等功能。 - In addition, the strategy based on the finite state machine mode scheduling is effective to finish landing mode scheduling, and the safety in the process of landing is ensured, therefore the autonomous flight ability of SUH has been improved greatly.
此外，采用基于有限状态机的模态调度策略能够有效地完成自主降落过程中的模态调度，保障了降落过程中的安全性，提高了小型无人直升机的自主飞行能力。 - Humans have been dreaming through direct language can make all sorts of corresponding machine, in order to finish the work under special environment.
人类一直都在梦想着能够通过语言直接指挥机器做出相应的各种动作，以便于完成特殊环境下的工作。 - And then the inspection method based on support vector machine neural network is put forward to inspect bottle finish.
为此特提出基于支持向量机神经网络的瓶口质量检测算法。 - The machine with multi-spindle can finish the processing of porous parts. The processing efficiency has been improved greatly.
装配有多轴器的普通钻床可以对多孔零件进行一次性加工，大大提高了零件的加工效率。 - The hydraulic system type and the needed parts are defined according to the work that the light laying machine need to finish, and the main parts are calculated. 6.
根据铺轨机所需完成的动作，确定了液压系统的型式和所需的液压元件，并对主要的元件进行了设计计算。 - Compared to the static and dynamic characteristics of Numerical control machine in finish machining process, thermal error has become the main factors to the processing precision.
数控机床在精加工过程中的切削载荷一般不大，与静刚度相比，振动特性与热特性是造成加工精度不足的主要因素。